Air classifier mill(ACM) and hammer mill are both crushing and grinding equipment. Both them belong to the category of mill, and they are commonly used for crushing equipment in industry. But they also have many difference. Compared with hammer mill, the advantages of ACM/air classifier mill mainly reflect in the following aspects:
Below are the advantages of ACM:
1. Integrated grinding and classifying
Air classifier mill(ACM) combines grinding and classifying into one system, thereby increasing efficiency. In contrast, hammer mill has no integrated grinding and classifying system. So compared with ACM, the production efficiency of hammer mill is lower.
2. Finer particles
ACM can achieve finer and more uniform particles, even up to the nanometre level. Hammer mill can also perform fine grinding of material , but the finest particle is usually between 1-5 microns.
3. Suitable for handling heat-sensitive
Air classifier mill usually operates at low temperatures. Meanwhile, It generates only little heat during its operation, These two factors prevent heat-sensitive material from thermal decomposition or oxidation. While hammer mill utilizes high-speed impact mechanism of the hammer head, at the same time, friction of internal components occur during operation, so excessive heat is generated. This may reduce the quality of finished product of heat-sensitive material.
4. Easy to clean
ACM has a simple internal structure, and the airflow helps to remove the residual material, which reduces the difficulty of cleaning. This feature is particularly beneficial in occasions where material is frequently changed, or with strict requirements on mass production. While, hammer mill has more internal residual material, especially at the position of hammer head and the sieve. This increases the difficulty and complexity of cleaning.
Compared with hammer mill, the characteristics of air classifier mill make it suitable for more occasions, and the application prospect of air classifier mill will become boarder.
Qingdao Epic Powder Machinery Co., Ltd. είναι α κατασκευαστής που ειδικεύεται στην παραγωγή μηχανημάτων πούδρας.
Ο κύρια προϊόντα περιλαμβάνουν:
– Μύλοι: σφαιρόμυλος, μύλος ταξινομητή αέρα (ACM), κυλινδρόμυλος, μύλος εκτόξευσης, μύλος turbo και κρουστικός μύλος κ.λπ.
Ο μύλος ταξινομητή αέρα περιλαμβάνει: MJW-W, MJW-L, MJW-A, MJL-W. and Εργαστήριο ACM.
– Ταξινομητές: περιλαμβάνει τέσσερις σειρές ταξινομητών αέρα: HTS, ITC, MBS and CTC.
– Τροποποιητές επιφανειακής επίστρωσης: τροποποιητής pin-mill, τροποποιητής στροβιλομύλου και τροποποιητής τριών κυλίνδρων κ.λπ.
– Βοηθητικός εξοπλισμός: ντουλάπι ελέγχου, συλλέκτης σκόνης and bucket elevator, etc.
– Οι πελάτες μπορούν να προσαρμόσουν τα προϊόντα σύμφωνα με τις πραγματικές ανάγκες. Ένας πελάτης, ένα σχέδιο.
Εάν ενδιαφέρεστε για μύλο ταξινομητή αέρα (ACM) από Έπος Qingdao, επικοινωνήστε με το προσωπικό μας άμεσα, είμαστε πάντα στη διάθεσή σας.
Παρακάτω είναι φωτογραφίες από Έπος Qingdao για την αναφορά σας.
